4x4Wire

About you, your 4x4 and access
John Stewart

Staun Internal Beadlock Install

One Piece Alloy WheelFirst, you need to determine if your rims are acceptable for the Staun internal beadlock.  Acceptable means one piece alloy or steel rims.  And, even if it is a one piece rim, there may be a structure issue that makes a particular style of rim a bad choice.  

The internal beadlock is a tire within a tire.  One hole is required to be drilled in the rim for the valve stem of the inner tire.  And, it requires a flat surface that is parallel on the inside and outside in a location that does not interfere with the brake assembly.

Continue reading
0
  10877 Hits
  0 Comments
4x4Wire.com

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting. Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission. You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material. All corporate trademarks are the property of their respective owners.

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting. Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission. You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material. All corporate trademarks are the property of their respective owners.